background image

Operation of the snow thrower in the hand-held   
position is unsafe except in accordance with the 
special instructions for such use provided in the  
operator’s manual. 
 

CAUTION:

 Never throw snow towards people, pets 

or cars and never allow anyone in front of the snow 
thrower while in operation. 
 
Objects that might clog the snow thrower or cause 
other damage can be hidden in the snow.  Clear the 
area of doormats, sleds, boards, wires and  other 
debris prior to use. 
 
If the auger strikes a foreign object, stop the snow 
thrower and examine it for signs of damage. Make 
any necessary repairs before restarting and        
continuing to work. 
 
STAY ALERT - Watch what you are doing. Use 
common sense.  Do not operate the snow thrower 
when you are tired or under the influence of drugs, 
alcohol or medications. 
 
If the snow thrower starts to vibrate abnormally, turn 
it off immediately and check for the cause.  Vibration 
is generally a warning of trouble. 
 
Always turn off the snow thrower, wait until the    
auger comes to a complete stop and disconnect 
from the power supply before carrying out         
maintenance or repairs. 
 
Never operate the snow thrower without proper 
guards and other safety protective devices in place 
and working. 
 
When servicing use only identical replacement 
parts. 
 

CAUTION:

 Auger does not stop immediately after 

the snow thrower is turned off. 
 

CAUTION: 

Risk of injury. This snow thrower is    

capable of causing serious injury. Do not put hands, 
feet or any body part or clothing near the rotating 
auger. 
 

WARNING: California Proposition 65:   

 

This product contains chemicals known to the State 
of California to cause cancer, birth defects or other 
reproductive harm.

 

GROUND FAULT CIRCUIT INTERRUPTER (GFCI) 
protection should be provided on the circuit or outlet 
to be used for the snow thrower. Receptacles are 
available having built-in GFCI  protection and may 
be used. 
 

WARNING: 

Never put your hands near the auger to 

remove snow, sticks or other debris. Blocked auger 
can “spring back” when cleared and may cause  
personal injury even when the snow thrower is 
stopped. Always use a wooden stick such as a 
broom handle to clear blockages. 
 
DISCONNECT UNIT from the power supply when 
not in use or when servicing or cleaning.  Do not 
leave unattended. 
 
DON’T ABUSE CORD - Never carry this product   
by the cord or yank the cord to disconnect from the 
receptacle.  Keep cord from heat, oil, and sharp 
edges. 
 
USE RIGHT APPLIANCE - Do not use this product 
for any job except that for which it is intended. 
 
DO NOT OVERLOAD the snow thrower by using at 
too fast a rate to clear the snow. The snow thrower 
will perform better and safer at the rate for which it 
was designed. 
 
DON’T OVERREACH - Guide the snow thrower at a 
walking pace only. Keep proper footing and balance 
at all times.  
 
LIGHTING - Only operate your snow thrower in   
daylight or good artificial light. 
 
STORE IDLE UNIT INDOORS-When not in use, the 
snow thrower should be stored indoors in a dry area 
out of reach of children. 
 
MAINTAIN UNIT WITH CARE-Keep clean for best 
performance and to reduce the risk of injury. Inspect 
extension cord periodically and replace if damaged.  
Keep handles dry, clean and free from oil. 
 
Do not operate the snow thrower on a slope that is 
too steep for safe operation. When on slopes, slow 
down and make sure you have good footing. 
 
Before starting the snow thrower make sure the  
auger is not touching any object and is free to move. 
 
Do not attempt to clear snow from a gravel or 
crushed rock surface.  This product is only intended 
for use on hard, flat surfaces free of sand, stone and 
debris, wires or any other objects.  
 

GENERAL SAFETY

 

Summary of Contents for SN72018














































Reviews: