EarthQuake MINIME P10V2, User Manual

Page: 5 / 21

Specifications are subject to change without notice.
This triangle, which appears on your component,
alerts you to the presence of uninsulated,
dangerous voltage inside the enclosure -
voltage that may be sufficient to
constitute a risk of shock.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This triangle, which appears on your component,
alerts you to important operating and
maintenance instructions in this
accompanying literature.
Safe & Proper handling
The MiniMe P10
V2
subwoofer is considerably
light weight and easy to maneuver. However, we
encourage you to take precaution when unpacking
the unit to prevent any possible damage to your
MiniMe P10
V2
/P12
V2
. We further suggest the
following:
?
Do not apply pressure or push against the face of
the speaker as this will cause irrepairable damage
to the cone and suspension.
?
When carrying the MiniMe P10
V2
/P12
V2
, make
sure that the speakers/grilles are away from your
chest, eliminating the chance of pushing against
the face of the speaker.
?
Do not drop the MiniMe P10
V2
/P12
V2
or subject it to
sudden shocks. This will damage the external
finish and weaken the enclosure, creating air
leaks.
?
Avoid exposing the MiniMe P10
V2
/P12
V2
to
moisture. Water will damage the structure as well
as the amplifier and speakers.
?
Cleaning the MiniMe P10
V2
/P12
V2
is best done
using soft cloth. If needed, use mild detergent with
water. Like any other electrical unit, always unplug
the unit before cleaning it.
/P12
V2
Connection Tips
?
Keep all power cords away from all signal cables to
prevent humming from induced noise.
?
Choose reliable signal cable cords (Earthquake
Sound also specializes in high performance RCA
cables and patches).
?
All speaker wires that are ran through the walls
should be twisted type to reduce potential hum
noise pick-up.
?
It is best to use a grounded electrical outlet to
power the amplifier. Lack of input ground
reference could be unsafe. Consult with your
electrical contractor about proper grounding.
Unpacking the MiniMe P10 /P12
V2
?
Keep the original carton and packing materials for
future shipment or storage.
?
Check for any visual signs of damage. If you
encounter any concealed damage, consult your
Earthquake Sound dealer before proceeding with
unit installation.
?
Retain the sales receipt as it establishes the
duration of the limited warranty and provides
information for insurance purposes.
The MiniMe is packaged well for safety. We highly
suggest having a padded surface when unpacking it.
Step 1:
On a padded surface, carefully place the box on its
side to remove the bottom packing tape and staples.
Step 2:
Without tilting the box too much,
tug the bottom flaps outward and
keep the protective foam in place.
Step 3:
Gently reposition the box upright.
Step 4:
Slide the box off, minding
the protective foam on
the top, bottom and sides
o f
the subwoofer.
V2
MiniMe Manual 5 P10
V2
/P12
V2