EarthQuake MINIME P10V2, User Manual

Page: 13 / 21

Connecting Your Subwoofer(s) cont’d
Specifications are subject to change without notice.
High Level Dual Sub
Connect the speaker wire (up to 16-gauge) from the
receiver’s RIGHT SPEAKER OUTPUTS to the
MiniMe P10
V2
/P12
V2
’s RIGHT SPEAKER INPUTS.
Then, connect the speaker wire from the receiver’s
LEFT SPEAKER OUTPUTS to the MiniMe
P10
V2
/P12
V2
’s LEFT SPEAKER INPUTS.
Remember to always connect red-to-red and black-
to-black when making connections between a
receiver/processor to the subwoofer. You will notice a
lack of bass from your subwoofer if you inadvertently
reverse one of the connections (i.e. red-to-black).
In case the subwoofers become out of phase with the
main front speakers, adjust the phase shift to correct
the problem. Note that maximum bass is only
achieved when the sub is in phase with the speakers
in your system.
back of typical
processor/receiver
SPEAKER OUTPUT
CENTER FRONT
L
-
L R L R R
SURROUND SUR. BACK
+
-
+
NOTE:
DO NOT USE HIGH LEVEL AND LOW
LEVEL INPUTS AT THE SAME TIME
MiniMe Manual 13 P10
V2
/P12
V2