Page 14
SKU 97925, 99676
For technical questions, please call 1-800-444-3353.
When installing the Carbon Brushes, make sure the carbon portion of the Carbon
4.
Brushes contact the Motor’s Rotor and that the springs face away from the Motor.
Also, make sure the springs operate freely.
After replacement or cleaning, replace the two Brush Holder Caps.
5.
note:
New Carbon Brushes tend to arc or spark until they wear and conform to the
Motor’s Rotor.
troubleshooting
problem
possible Causes
possible solutions
Trigger Switch locked in
place.
Forward/Reverse Switch is in
1.
center position.
Move button to the left or right for
1.
forward or reverse operation.
Impact Wrench operates
slowly or without force.
Battery weak.
1.
Recharge Battery completely.
1.
Impact Wrench does not
turn on.
Battery completely discharged.
1.
Recharge Battery completely.
1.
Battery will not hold
charge.
Battery dead.
1.
Replace with new Battery.
1.
please read the Following CareFullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LIABILITY ARISINg OUT OF HIS OR HER REPAIRS TO THE
ORIgINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISINg OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
