9
6. Power ON Zero [Pn-Zro] -
The Scale have Power ON Zero function as
explained below. Power On Zero mean zeroing the weight on the scale
during power On only if the weight during power on is less than 20% of
Scale capacity. If the weight is greater than 20% of scale capacity then
scale will show Err 20 and scale need to be restarted.
If weight is greater than 20% of scale capacity then scale will show actual
weight kept on the scale directly when this function is off.
a. ON [Zro-y] - Power On Zero function is on.
b. OFF [Zro-n] - Power On Zero function is off.
To set Power ON Zero:
a. Enter in to User Parameter Setting Mode
b. using [TARE] & [ZERO] keys select Power ON Zero
c. Press [M] key to select Power ON Zero
d. Scale always shows previously set Power ON Zero. Using [TARE] &
[ZERO] keys select trE-y or trE-n.
e. Press [M] key to confirm the selection
f. Use [FUNC] key to escape from selection
Note: Pressing [FUNC] key it should back to Power ON Zero. If without
selection escaped out then scale should work on previous setting.
7. Peak Hold [P-HLd] -
Max weight shown by scale is kept displaying.
a. ON [HLd-y] - Keep flashing the max weight on display till [ZERO] key
Pressed after weighing.
b. OFF [HLd-n] - Peak Hold is made off.
c. Progressive [HLd-P] - The maximum weight is kept flashing till the weight
greater than the current flashing weight is not applied. The weight
displayed is progressively.
To set Peak Hold:
a. Enter in to User Parameter Setting Mode
b. using [TARE] & [ZERO] keys select Peak Hold
c. Press [M] key to select Peak Hold
PROVIDER OF LIFE STYLE & INDUSTRIAL SCALES
Survey No. 28/1, Damodar Nagar, Kharadi, Pune - 411014. Tel : + 91 - 20 30418100 / 110,
Fax : + 91 - 20 - 30418126. Email : [email protected]
