9
4. RS-232 Output Data –
The scale have 3 data available on RS-232 as
explained below.
To set RS-232 Output Data:
a. Enter in to User Parameter Setting Mode
b. Using [TARE] & [ZERO] keys select d-OUt
c. Press [M] key to select RS-232 Output Data parameter
d. Scale always shows previously set RS-232 output data. Using
[TARE] & [ZERO] keys select from OUt-N, OUt-G or OUt-t.
e. Press [M] key to confirm the selection
f. Use [FUNC] key to escape from selection
Note: Pressing [FUNC] key it will go back to RS-232 Output Data. If without
selection escaped out then scale will work on previously set Output Data.
5. Auto Tare [A-trE] -
The scale have Auto Tare function as explained.
When weight is nonzero and stable for 3sec the scale automatically
TARE that weight only once. TARE will be immediately removed only if
scale goes in negative value.
e.g. A container is kept on the scale and is automatically TARE the weight
once, now material is filled in the container i.e. scale is showing weight of
material taken in the container. After container is removed scale will show
negative weight previously TARED then immediately scale will remove the
TARE.
To set Auto Tare:
a. Enter in to User Parameter Setting Mode
b. using [TARE] and [ZERO] keys select Auto Tare
c. Press [M] key to select Auto Tare
d. Scale always shows previously set Auto Tare. Using [TARE] & [ZERO]
keys select trE-y or trE-n.
e. Press [M] key to confirm the selection
f. Use [FUNC] key to escape from selection
Note: Pressing [FUNC] key it will go back to Auto Tare. If without selection
escaped out then scale will work on previous setting.
PROVIDER OF LIFE STYLE & INDUSTRIAL SCALES
Survey No. 28/1, Damodar Nagar, Kharadi, Pune - 411014. Tel : + 91 - 20 30418100 / 110,
Fax : + 91 - 20 - 30418126. Email : [email protected]
