- 9 -
4. Maintenance & Troubleshooting
4.5 Strap Feed
1mm strap can be used by adjusting the gap between the crown bar and pry bar to 0.3mm (Fig. 4-1).
Additionally, the gap between the main motor and the brake should be set between 0.2mm and
0.3mm (Fig. 4-2).
Fig. 4-1
Fig. 4-2
4.6 Position Adjustments
Fig. 4-3
Fig. 4-4
1.
Cover Plate
2.
Feed Time Adjustment
3.
Unthreading Time Adjustment
4.
Spacing Time Adjustment
5.
Temperature Adjustment
To access the knobs for machine timing adjustment, remove the cover (1) to access the time
adjustment knobs (2-5).
1
2
3
4
5
