- 7 -
3. Machine Operation
3.3 Machine Operation
1.
Connect the machine to the power source.
2.
Thread straps according to the method listed in “Feeding Strap” on previous page.
3.
Set the air switch to the “On” position.
a.
If strap has been loaded properly, machine will begin to fill the collection chamber with
strapping material until it is full.
b.
If the machine does not fill the collection chamber and it is not full, turn the strap feed
switch to “Send” to feed strap.
4.
The heating element within the machine takes approximately 30 seconds to reach operating
temperature. The machine will not operate until the heating element has reached its operating
temperature.
5.
Set the operating mode.
6.
Place the package to be strapped into the center of the archway.
a.
Continuous Mode – Machine will apply strapping material any time an item is placed
within the strapping archway. Helpful for large volume work flow.
b.
Manual Mode – Machine will apply strapping material only when the “Pack” button is
pressed. Useful for occasional or when slow speed strapping is needed.
c.
Automatic Mode – Strapping occurs only 1) when carton activates ball switch on the
machine or 2) when operator activates the foot switch.
