- 4 -
2. Machine Safety Information
The Eagle 800 high-speed strapping machine employs a PLC for manual, automatic and continuous
operation. Easy to use and high-speed strapping features make the Eagle 800 suitable for a wide range
of applications including, but not limited to the chemical fiber field, tobacco leaf redrying,
pharmaceutical companies, publications, refrigeration, household appliances, ceramics, hot work, etc…
2.1 Operational Safety
1.
Verify all electrical connections and verify the machine is connected to an appropriate power
source.
2.
Do not place any part of your body into the archway.
3.
Do not touch the heating element.
4.
Do not allow excess moisture to build up in or on the machine. Do not rinse out the machine
with water.
5.
Do not make unnecessary adjustments to the machine or any of its components.
6.
Roll any used strap back onto the spool while the machine is not in use. This will prevent
deformation of the strap.
7.
Machine parts and components listed in the manual should be lubricated regularly.
8.
Do not apply lubricant to the roller wheel surfaces.
9.
While not in use, disconnect the machine from the power source.
2.2 Environmental Considerations
The machine should be located in an area that is free of smoke, corrosive material, and excess
moisture. Normal operating environment should be between 32-104ºF (0-40ºC) and 0-98% humidity.
2.3 Machine Transportation
When moving the machine with a forklift or tow motor, lift by placing the forks under the caster
wheels or feet. If equipped with caster wheels, be sure all wheels are in the locked position before
lifting or transporting the machine.
2.4 Operator Position
While operating the machine, the operator must stand to the front of the machine with at least 1/2in
(10cm) clearance between the machine and operator.
