19
EN
6
Putting
the
unit
into Operation
6.1
Connecting the Filling Tube
Screw in the filling tube by hand until some resistance against further
turning can be felt. Tighten with your fingers only, do not use any tools.
Fig. 6-1: Connecting the filling tube
6.2 Mounting the Syringe Adapter
For some applications, e.g. filling samples of higher viscosity, filling via
syringe may be more convenient. To do so, mount the syringe adapter.
Mounting the syringe adapter
1. Remove the screw plug (see fig. 5-1).
2. Screw in the adapter Luer ¼" UNF by hand until some resistance against
further turning can be felt. Tighten with your fingers only, do not use any
tools.
6.3 Switching the Instrument On/Off
• To switch
the unit
on, press the key until the display lights up.
• To switch
the unit
off, press the key until the instrument is switched
off.
