background image

11 

04: 

From top to bottom display the total active power, total reactive power, total apparent 

power, display units are watts, var, VA, and with k combined into kw, kvar, kVA, and with 

M combined into MW, Mvar, MVA;   

05: 

Three-phase active power display, from top to bottom as A, B, C-phase power, 

display units in watts, and with k, M combined into kilowatts, megawatts;   

06: 

Three-phase reactive power display, from top to bottom as A, B, C phase reactive, 

lack of display units, and with k, M combination into kvar, Mvar;   

07: 

Display of three-phase apparent power, from top to bottom as A, B, C phase 

apparent power, display units VA and with k, M combined into KVA, MVA; 

08: 

From top to bottom display voltage and frequency, the total power factor, frequency 

is displayed in Hertz;   

09: 

Display of three-phase power factor, from top to bottom as A, B, C-phase power 

factor;   

10: 

Shows the total active energy, the first line shows the symbol Ep, second and third 

lines are combined into 8 data show power, display unit’s kWh;   

11: 

Shows the total reactive energy, the first line shows the symbol Eq, second and third 

lines are combined into eight data show power when the unit kvar display;   

Summary of Contents for LB-AC Series






















Reviews: