![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/dcps-frs-2421k/dcps-frs-2421k_operation-manual_3282182038.webp)
38
Section 8.
Control Module
The
DCPS-FRC-2421K
Control Module
is located in the
DCPS-FRS-2421K Main shelf and performs tasks shown in
the block diagram below.
To remove the Control Module from the shelf, the ON/OFF switch
on the front panel must be turned off. Then back off
the 2 thumb screws and use the pull handle to remove
the module.
To replace the Control Module into the Shelf, turn off
the ON/OFF switch, insert the Control Module until it
Seats into the backplane connector, tighten the 2
thumb screws, then turn the ON/OFF switch to the ON position.
Figure 32. Control Module block diagram
ON/OFF
switch
Pull Plate
Thumb Screws
CAUTION: Always turn the ON/OFF switch to OFF when the
Control Module is removed from or re-inserted into the Shelf
Eagle Eye Power Solutions, LLC | 877-805-3377 | www.eepowersolutions.com