![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/dcps-frs-2421k/dcps-frs-2421k_operation-manual_3282182016.webp)
16
GUI Log-In using the DEBUG port
(continued)
2.
Run the “
FRS_2421K.exe
” (GUI) program.
3. Click
‘
Access
’ then ‘
Login
’.
4. In the Login pop-up window,
enter the
ID
and
Password
then click
the
Log-in
button (or Enter).
5.
Click ‘
Access
’ then ‘
Connect
.
6.
Select “
Serial Port
” then enter the
COM Port #
of the adapter-connected
USB port. (To confirm the correct port,
go the “Ports” list in Device Manager).
The “
Port Refind
” may also be clicked to
quickly snap into the correct COM Port.
7. If shown, select
“
Read from Rectifier
”
then “
Connect
” (otherwise just click
“
Connect
”).
Note
: If GUI fails to connect or load properly, ensure
DEBUG cable Is wired as shown in
Figure 5b
.
Figure 6a. Access, Log-in, Connect
Figure 6b. GUI Loading (Progress bar)
8. A
Progress Bar
is shown while
connecting and the DEBUG
(RS232) connection completes
within just a few seconds. When
100% complete, the Shelf is
connected to the PC/laptop and
the
FRS-2421K GUI (Main Page)
is active, as shown in
Figure 7
.
Eagle Eye Power Solutions, LLC | 877-805-3377 | www.eepowersolutions.com