![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/dcps-frs-2421k/dcps-frs-2421k_operation-manual_3282182033.webp)
33
Section 5.
Tools
5.8 Controller Reset
page
–
forces the Control Module to reset.
Controller Reset
allows an intentional reset of the Control Module. To start the reset process:
Click the confirmation
then..
Click the Setting button
The Control Module reset process completes within
less than 25 seconds
.
During the reset process, external alarms are cleared (all Normal, all green), and the
Control Module front-panel status LED is green. Network communication and Rectifier
Module-to-Module communication is temporarily disabled but resumes immediately
upon completing the Reset process.
When the Control Module reset process is complete, all Shelf settings and alarm states
should return to the same values and conditions as they were prior to the reset process.
Figure 25. Controller Reset page
Section 5.
Tools
5.9 Factory Initial
page
–
allows the user to reset
all log files and separately reset all alarm settings to
the factory default settings.
1.
Click on the
Composition Initial
button
then
click the
Setting
button to clear all line items
in the 3 log files (Alarm Log, Data Log, and
Event Log) located under the
Log
heading in the GUI.
2.
Click on the
Alarm Initial
button then click the
Setting
button to reset all alarm settings to the
factory default settings.
Figure 26. Factory Initial page
Eagle Eye Power Solutions, LLC | 877-805-3377 | www.eepowersolutions.com