![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/dcps-frs-2421k/dcps-frs-2421k_operation-manual_3282182020.webp)
20
Section 4.
GUI (Main Page) Elements
4.3 Alarms
All active alarms (red) that are listed in the
Used
Alarm Group
are shown in the
Alarms
drop-down
list. The Alarm Name and the red alarm status
indicator will be listed for each active alarm unless
the drop-down menu is closed. Only alarms that
have been configured as “Used” (in the
User
Alarm Group>Alarm Define
page) can alarm.
Figure 17 shows the
Tools>Alarm Manager>
Alarm Items Setting
page. Alarm Manager details
are found in
Section 5
–
Tools
of this User Manual.
Figure 12. Alarm dropdown list
Figure 14. Alarm Manager- Dry Contact Alarm page
Figure 13. Dry Contact Alarms
4.4 Dry Contact Alarm
Only Dry Relay Alarms that have been assigned to any Dry Contact can
alarm. Alarms are assigned to Dry Contacts in
the “Mapping” section
in
the Alarm Manager-Output Relay Mapping page (see
Section 5.1.1
for
details). To view mapped (assigned) alarms, click on any
Dry Contact
in
the list to open the
Dry Contact Alarm
page (see
Figure 14
). All alarms
that are check-marked are mapped to the chosen
Dry Contact. Any alarms listed on this page
may be assigned to any of the Dry Contacts.
Note that it is allowed to map the same
alarm to more than one Dry Contact.
See
Section 5
–
Tools>Alarm Manager
of
this User Manual for more details..
Eagle Eye Power Solutions, LLC | 877-805-3377 | www.eepowersolutions.com