19
STEP 9
Installing the Power Unit
1] Carefully remove the Power Unit (Fig. 12) from its box and packaging; inspect and immediately
notify Eagle Equipment Customer Service if any shipping damage is found.
(Fig. 12)
2] Mount the Power Unit to the mounting bracket on the Main-Side Post, using four (4) 5/16” x ¾”
hex bolts, flat washers, lock washers, and nuts. Use the lower 2 pairs of slotted holes on the
power unit bracket.
3] Fill the reservoir to the fill line with hydraulic oil. USE ONLY:
ISO-32
or
AW-32
10-wt. Hydraulic
Oil.
DO NOT USE DEXRON, ATF, TRACTOR OIL or JACK OIL.
AW-32 can be purchased at
your local auto parts store.
WARNING
:
DO NOT use ATF in this lift!
NOTE: Power Unit Reservoir can be filled either before or after mounting it to the lift; whichever
the installer finds easier.
(Fig. 13)
