E-T-A ControlPlex CPC20, User Manual

Page: 26 / 32

26
fig. 29: Device information channel
fig. 30: Configuration data channel
9.2.2 »Device information« device information for one channel
The device information for one channel consists of 19 bytes.
It is read with COM = 1...2, channel = 1...32 and index 2.
All parameters with possible conditions are described in the following table.
9.2.3 »Device type config« configuration data of for one channel
The configuration data for one channel consist of 3 bytes.
They are read and written with COM = 1...2, channel = 1...32 and index 3.
All parameters with possible conditions are described in the following table.
byte type range description
circuit breaker p/n 0 HighByte
1 LowByte Int 36894 = ESX60D
This list may be extended by future controllers.
hardware version 2 HighByte
3 LowByte Int 0…65535 holds the hardware version of the installed product
assembly order
no. internal 4 HwHb
5 HwLB
6 LwHB
7 LwLB Dint 0…4294967295 holds the assembly order no. of the installed
product
production facilities
number 8 HwHb
9 HwLB
10 LwHB
11 LwLB Dint 0…4294967295 holds the assembly order no. of the installed
product
serial number 12 HwHb
13 HwLB
14 LwHB
15 LwLB Dint 0…4294967295 holds the serial number of the installed product
software version
(major.x.x) 16 byte 0…255 holds the major software version of the installed
product
software version
(x.minor.x) 17 byte 0…255 holds the major software version of the installed
product
software version
(x.x.build) 18 byte 0…255 holds the build software version of the installed product
byte type range description
circuit breaker p/n 0 HighByte
1 LowByte
Word 36894 36894 = ESX60D
This list may be extended by future circuit protectors.
channel release 2 byte 0xFF Bit0
Releases the circuit protector. If the bit is not set, the channel is
blocked.
The remaining bits are not used currently.