Tutorials
Steinberg WaveLab Lite
16
Creative Professional
2 - Turning on the PatchMix WAVE Send
WaveLab Lite interfaces with PatchMix DSP using WAVE audio instead of ASIO. A WAVE
Send is included in the PatchMix Product Default session. You just have to turn it on.
This is the setup you’ll use with any application that uses WAVE instead of ASIO.
Open PatchMix
1.
Left-click once on the E-MU
icon on the Windows System Tray. The PatchMix
DSP mixer window appears.
2.
Make sure that the
Product Default
session is loaded. This session is easily recog-
nized by the presence of
TWO Sends
in the Aux 1 section (yellow box below).
• If the Product Default session is NOT selected, click once on the
Open Session
button and select “Product Default” from the list.
f
The TV screen shows
the details of whichever
insert you click on. In the
example at left, the Insert
Send highlighted in
yellow is shown is the TV
screen.
Supply Audio to PatchMix
3.
Connect your audio source to any mono or stereo input on the Digital Audio
System. Verify that you have meter activity on the channel.
Turn up the Aux Send 1 Amount
4.
Turn up the Aux Send 1 Amount on the input channel you are using.
In the
screen above, signal is coming in on Dock Inputs 1L/1R, and the Aux 1 Amount is
turned up all the way to 0.0dB, as shown by the arrow.
5.
Notice the Send
highlighted above in yellow. The TV screen shows this to be a
WAVE Send. By turning up the Aux 1 Amount, you routed the signal to the Aux 1
bus and then out the WAVE Send.
