13
ELECTRIC SCOOTER
2.
Align the handlebar vertically and horizontally onto the handlebar stem’s clamp, align the handlebar top clamp and insert the bolts and
nuts. Adjust the handlebar and tighten the bolts and nuts evenly and securely with a 5mm hex wrench and a 10 mm spanner. The throttle should
be on your right hand as you stand on the scooter’s deck.
3.
Assemble the lock spanner (1) on the lower part of the steering tube. Assemble the upper throttle plugs (2) on the throttle plugs on the
other side (3). Make sure the parts are tight. Assemble the upper part of the steering tube (6) on the lower part of the steering tube (5). Make
sure the spring button works properly. Adjust the height according to the user’s height. Tighten the lock spanner.
4.
Adjust the height according to the three holes.
ASSEMBLY
Charging Battery
Warning: Always fully charge the battery before riding, do not overcharge the battery!
WARNING: The scooter must always be switched off while being charged.
Runtime: Up to 60 minutes of continuous ride time.
Component required: Charger
1.
Time of charging for the first time: at least 12 hours.
2.
Time of any subsequent charging: at least 8 hours.
3.
To keep the scooter in good performance, you need to charge it every 2 weeks when it is not regularly used.
1.
Check that the power switch is on “OFF” position before plugging in your charger. Plug the charger into the charging socket, which is
on the right side of the battery box.
2.
Connect the charger plug into a 240V power supply. The charger indicator shall be on. Red colour indicates that the battery is being
charged and green colour indicates that the battery is fully charged.
WARNING: Always disconnect your scooter from the charger before cleaning with a damp cloth.
•
Your charger may get warmer during use; this is normal and is no cause for concern.
•
Chargers have built-in over-charge protection to prevent the battery from being over-charged.
•
Battery chargers used with the scooter are to be regularly checked if cord, plug, enclosure and other parts are damaged, and in the
event of such damage, they must not be used.
BEFORE YOU RIDE
Before you ride always check for the following:
Personal Protection Equipment (PPE)
Always wear proper protective gear such as:
•
Approved safety helmet (Helmet may be legally required by local law or regulation in your area)
•
Elbow pads and knee pads
•
Long sleeves shirt, long trousers
• Gloves
•
Sport shoes
Brake
Never ride the scooter if its brake malfunctions.
Thumb Trigger
If the power switch is on “ON” position, rotate the thumb trigger to start the motor and drive the scooter forward. Make sure you are in an open
and safe place before rotating the trigger. Balance your body and hold the steering handle with both hands while riding.
Hardware Maintenance
Brake
Please check if the brake functions well: when you squeeze the brake, the rear wheel should stop rotating; the power should be turned off and
the motor should stop working when using the brake and speed control at the same time. Ensure that the wheels rotate freely and easily when
the brake is not being applied. Don’t ride the electric scooter when the brake doesn’t work.
Frame, Fork and Steering Handle
Check the frame, fork and steering handle for cracks or loose connections. It is necessary and important to check the scooter regularly.
Tyres
Please regularly check whether the tyre pressure of front and rear wheels have the calibrated air pressure and check the tyres for excessive
wear/aging.
Personal Protection Equipment
Always wear reliable safety helmet, elbow pads, knee pads, and sports shoes. Never ride the scooter barefoot or with sandals. Make sure the
shoelaces are tied reliably and are out of wheel and driving system.
Battery
Always switch off the power when the scooter is not in use. Never store the scooter at low temperature; it may degrade or damage the battery
permanently.
Throttle/Handle
When the scooter is not in use please ensure the kickstand is always used. If dropped, essential components can be damaged and could affect
the scooter use as well as invalidate the warranty. If you damage this part of the scooter it is strongly advised that you replace the damaged
parts as soon as possible to avoid any accident caused by making contact with these parts.
