E-FLOR HEA 710, Instructions For Use Manual, Page: 27 / 169

26
Defects
Pruner won‘t start
Cause: Repair
Power failure Check the power supply
Defect of the power cable Check, replace
Protection defect Replace
Pruner faltering when in operation
Cause: Repair
Defect of the on/off switch Seek expert service
Machine with a loose contact Seek expert service
Power cable defect Seek expert service
Pruner dry, chain and guide rail become hot
Cause: Repair
No oil in the tank Refill oil
Clogged oil nozzle or channel Clean
Too high chain tension Loosen the chain
Clogged air vent in the oil tank Clean the tank closing
Pruner does not work
Cause: Repair
Defect of the gear mechanism in the hand
protection
Seek expert service
Pruner does not saw properly, grinds or knocks
Cause: Repair
Chain tension too low Adjust the chain tension
Idle chain Sharpen or replace the chain
Chain defect Replace the chain
BDA_E-FLOR_HEA_710.indd 26 07.11.16 13:18