44
E-flite Habu 32 EDF ARF Assembly Manual
Exhaust Tube and
Speed Control Installation
Required parts
Fuselage assembly Exhaust tube
Clear tape
Fan access hatch
Speed control
Hook and loop tape
Required Tools and Adhesives
Hobby scissors
Felt-tipped pen
Hemostats
1. Carefully roll or fold the exhaust tube into the
shape shown below. It is made of a durable clear
plastic and will not be harmed by doing so.
2. Slide the exhaust tube into the fuselage, with
the wider end of the tube entering the fuselage
from the rear. It will “pop” open when it has been
inserted fully into the fuselage.
3. Position the exhaust tube so it overlaps onto the
fan assembly.
4. Use clear tape to secure the thrust tube to
the fan housing.
5. Use clear tape at the bottom of the thrust
tube to secure the tube at the rear of the
fuselage.
6. Route the leads from the motor through the oval
opening at the bottom of the former near the intake
ducts. Use clear tape to tape the leads to the fan
housing and intake duct so they don’t move and
interfere with the operation of the elevator servos.
7. Cut a piece of hook and loop tape to fit the back
of the speed control using scissors. Apply the tape
to the speed control as shown.
Matching the colors between the ESC and motor
when they are connected results in the correct
motor direction if using all E-flite components.
