background image

PILATUS PORTER

PC-6

MONTAGEANLEITUNG

VQA0371 

INSTRUCTION MANUAL

VQA037Y 

VQA036W

SPECIFICATIONS

Wingspan                                       1580mm
Length                                            1160mm
Electric Motor          870 Watt (PULSAR 60)
Glow Engine                       .46 2-T / .70 4-T
Radio                          5 Channel / 5 Servos

WARNING!

 This radio controlled model is NOT a toy. If modified or flown carelessly it could go out of controll and

cause serious human injury or property damage. Before flying your airplane, ensure the air field is spacious enough.
Always fly it outdoors in safe areas and seek professional advice if you are unexperienced.

ACHTUNG! 

Dieses ferngesteuerte Modell ist KEIN Spielzeug! Es ist für fortgeschrittene Modellflugpiloten bestimmt,

die ausreichende Erfahrung im Umgang mit derartigen Modellen besitzen Bei unsachgemäßer Verwendung kann
hoher Personen- und/oder Sachschaden entstehen. Fragen Sie in einem Modellbauverein in Ihrer Nähe um
professionelle Unterstützung, wenn Sie Hilfe im Bau und Betrieb benötigen. Der Zusammenbau dieses Modells ist
durch die vielen Abbildungen selbsterklärend und ist für fortgeschrittene, erfahrene Modellbauer bestimmt.

TECHNISCHE DATEN

Spannweiter                                  1580mm
Lange                                            1160mm
Elektroantrieb         870 Watt (PULSAR 60)
Verbrennerantrieb        7.5cc 2-T / 11cc 4-T
Fernsteuerung                5 Kanal / 5 Servos

VQA0361

46 Class 

52 Class 

(2T engine)

(4T engine)

Or Electric equivalent

Radio control model  / R/C Flugmodel

Summary of Contents for VQA0361

















Reviews: