EN
®
Wing Installation
Before each fl ight, ensure all wing connectors and fasteners are secure.
Assembly
Assemble both wings using the following steps. (Only the right wing shown)
1. Install 6 vortex generators (A) in the wing channels (B) by using double-
sided tape (C).
2. Install the vertical bracket (
D
) on the wing mounts using 2 screws (
E
) and
2 lock nuts (
F
).
TIP:
DO NOT overtighten lock nuts on the screws. Ensure the vertical
brackets can pivot freely on the wing mounts.
3. Install the wide front strut (
G
) on the front strut mounts using a screw (
H
)
and lock nut (
I
).
4. Install the narrow rear strut (
J
) on the rear strut mount using a screw (
K
)
and lock nut (
L
).
TIP:
DO NOT overtighten lock nuts on the screws. Ensure the struts
can pivot freely in the strut mounts.
5 Attach the vertical bracket to the struts using 2 pins (
M
) and 2 R-clips (
N
).
E
D
FF
G
JJ
H
I L
K
N
M
A
C
B
A
A
A
C
B
12