Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual
3-19
General Operation
3.2.2.11
SNSZ Status
1
To send a Status, press and hold the Single Touch button assigned to Status.
2
The Status alias programmed to Single Touch is displayed for one second.
3
Either an Ack Received message or a Status Fail message is displayed after the Status
has been sent.
4
Once the Status is sent, operation continues as normal for Status.
5
The Status is not able to be exited while sending unless it is canceled by another
function. The user must wait for the Ack or the Fail message.
3.2.2.12
SNSZ Message:
This is same operation as Smartnet/Smartzone Status except that a Message is being sent.
1
To send a Message, press and hold the Single Touch button assigned to Message.
2
The Message alias programmed to Single Touch is displayed for one second.
3
Either an Ack Received message or a Message Fail message is displayed after the
Message has been sent.
4
Once the Status is sent, operation continues as normal for Message.
5
The Message is not able to be exited while sending unless it is canceled by another
function. The user must wait for the Ack or the Fail message.
3.2.2.13
SNSZ Interconnect:
1
To start an Interconnect Call, press and hold the Single Touch button assigned to Inter-
connect.
2
The alias of the phone number being called will be displayed.
3
Once the call is started through Single Touch, operation continues as normal for
Interconnect Call.
4
To exit the call either press the Clear button or the Single Touch button assigned to
Interconnect.
5
To answer an Interconnect Call with the Single Touch button press and hold it.
6
Once pressed and held the incoming call will be answered and operation will continue
as normal for Interconnect Call.
