Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual
9-5
Tones & Error Messages
DENIED
“Denied”
“DENIED”
“Denied”
This error indicates that a group call attempt has received a
DENIED response from the system.
DENY
“Deny”
“DENY”
“Deny”
This error indicates that a unit or interconnect call attempt has
received a DENIED response from the system.
DISABLED
“Disabled”
“DISABLED”
“Disabled”
This error indicates that the feature that the user is attempting
to use has been disabled on the radio either by programming
or by factory options.
DSP_FAILED
“DSP Failed”
“DSP FAILED”
“DSP Failed”
This error indicates that the DSP failed to complete its startup
procedure at powerup. This is also indicated with 7 orange
blinks of the LED.
ENCRYPTION_FAIL
“Encrypt Bad”
“ENCRYP BAD”
“Encryption Bad”
This error indicates that the main processor and the
encryption module have failed to complete their startup
procedure at powerup. This error is also indicated with 11
orange blinks of the LED.
FIXED_AUTO
“Fixed Auto”
“FIXED AUTO”
“Fixed Auto”
This error indicates that the selected channel or group is
strapped to auto power and thus high/low power cannot be
selected.
FIXED_HIGH
“Fixed High”
“FIXED HIGH”
“Fixed High”
This error indicates that the selected channel or group is
strapped to high power and thus low power cannot be
selected.
FIXED_LOW
“Fixed Low”
“FIXED LOW”
“Fixed Low”
This error indicates that the selected channel or group is
strapped to low power and thus high power cannot be
selected.
HC08_FAILURE
“HC08 Failure”
“HC08 FAIL”
“HC08 Failure”
The HCO8 was not initialized correctly and cannot be
accessed for flash reads and writes, etc. This error will also be
indicated with 9 orange blinks of the LED.
INVALID_USER
“Invalid User”
“INVLD USR”
“Invalid User”
This error indicates that the user’s radio ID was rejected by
the system. This message is primarily related to data
registrations.
KEY_FAIL
“Key Fail”
“KEY FAIL”
“Key Fail”
This error indicates that the encryption key required by the
current selected group / channel is not valid or does not exist.
KEYPAD_LOCKED
“Kypd Locked”
“KYPD LCKED”
“Keypad Locked”
This error indicates that the keypad lock function is active and
key presses are not accepted in this mode.
KEYSET_FAIL
“Kset Fail”
“KSET FAIL”
“Keyset Fail”
This error indicates that the radio was not able to activate the
encryption keyset chosen by the user.
LIST_FULL
“List Full”
“LIST FULL”
“List Full”
This error occurs during Scan Edit when a user attempts to
add too many channels to the scan list.
Message Enumerations
Portable/SCH/LCH
Strings
Description
