Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual
9-1
S
E C T I O N
Section9
Tones & Error Messages
9.1
Supervisory Tones
Supervisory Tones are described as follows:
Single Beep (Alert Tone)
• Power was turned ON and a successful power-up sequence occurred (see Section 3.1.1).
• The time-out timer is about to expire or the penalty timer has expired (Section 4.3).
• The conversation timer is about to expire (Section 5.6).
• The system received your page but the paged radio is not on the air (Section 6.6).
• Telephone interconnect is not operational (Section 6.5).
Continuous Tone (Invalid Condition)
• A transmission is being attempted on a conventional channel programmed as receive-
only.
• The transmitter is disabled by the transmit disable on busy feature (Section 5.3).
• The transmitter has been disabled by the time-out timer feature (Section 4.3).
• The transmitter has been disabled by the conversation timer (Section 5.6).
• An out-of-range condition exists (SMARTNET/SmartZone only).
• A transmission is being attempted before the penalty timer has expired (Section 4.3).
