Draft 02 - Sep 1 2015
Viking Mobile Radio Operating Manual
6-25
SMARTNET / SmartZone / P25 Trunked Features
The problem with this operation is that every time a different talkgroup is selected, the
access permission may be different and a different site may need to be accessed. This
could result, in a worst case, in a delay of up to 30 seconds in finding a new site. This
could occur if there are no valid sites for the new talkgroup in the dynamic site list.
6.14.9 Radio Information
Various radio information can be viewed on the radio display. The “Radio Info” radio
button or menu item is selected to view this information. When selected, the information
will scroll across the radio display. You can pause, and move the text back and forth using
the same controls as you would for text messaging.
This information includes:
• Band - Current operating frequency band.
• Software - Current software version running on the radio.
• Radio Alias - Current radio alias programmed to the radio.
• Radio Tag - Current Radio Tag
• Profile Tag - Current Profile Tag
• Unit ID - Current assigned unit ID number.
• Key - Current assigned encryption key ID number.
• OTA IP - Current IP address assigned to the radio.
• ESN - will display the electronic serial number of the radio.
• SEM - will display the version of software running on the SEM module.
• MAC Address - will display the media access control identifier for the radio.
• ETH IP - will display IP address set for network communications between the radio and
a PC.
• Wi-Fi - will enter wireless settings menu on select.
6.14.10 Current Software version in the radio
The current firmware version loaded into the radio is identified. This can be downloaded
from programming.
