Draft 02 - Sep 1 2015
9-6
Viking Mobile Radio Operating Manual
Tones & Error Messages
LIST_ONLY
“List Only”
“LIST ONLY”
“List Only”
This error occurs when the user attempts to do direct entry of
a unit ID/phone number for Call Alert/Unit Calls/Interconnect
Calls but the call setting is set for list only.
LOCKED
“Locked”
“LOCKED”
“Locked”
This error indicates that the dynamic regrouping selector lock
command has been received and zone and channel changes
are not accepted.
LOSS_OF_SIGNAL
“Signal Loss”
“SIGNL LOSS”
“Signal Loss”
This error indicates that signal from the infrastructure has
been lost during an interconnect call or a P25 Trunking unit
call.
MESSAGE_FAILED
“Msg Failed”
“MSG FAILED”
“Message Failed”
This error indicates that the message the user was trying to
send failed. This applies to conventional messaging.
NEVER_SITE
“Never Site”
“NEVER SITE”
“Never Site”
This error indicates that the user tried to site lock to a site
which was assigned a preference of “Never”.
NO_ANSWER
“No Answer”
“NO ANSWER”
“No Answer”
This error occurs when the user initiates a trunking unit call/
interconnect call but the call was not answered before being
canceled by the system.
NO_GPS_DATA
“No GPS Data”
“NO GPS DAT”
“No GPS Data”
This error occurs when the user attempts to use the GPS
feature but the radio is not receiving GPS data.
NO_EDIT
“No Edit”
“NO EDIT”
“No Edit”
This error indicates that the current list is not able to be edited.
Applies to conventional and radio wide scan edit.
NO_ENCRYPT
“No Encrypt”
“NO ENCRYPT”
“No Encrypt”
This error occurs when attempting to use or load keys but the
radio is not optioned for encryption.
NO_IP_REG
“No IP Reg”
“NO IP REG”
“No IP Reg”
This error occurs when the user attempts to send GPS data
without being IP registered.
NO_ITEMS
“Menu Empty”
“MENU EMPTY”
“Menu Empty”
The menu the user tried to access does not have any items.
NO_KEYS
“No Keys”
“NO KEYS”
“No Keys”
This error indicates that no keys are available for the key
select function.
NO_LIST
“No List”
“NO LIST”
“No List”
This error indicates that no list is programmed for the selected
feature.
NO_MESSAGE
“No Message”
“NO MESSAGE”
“No Message”
This error occurs when attempting to activate the Message
feature but no messages are programmed.
Message Enumerations
Portable/SCH/LCH
Strings
Description
