GENERAL OPERATION
22
•
To turn radio wide scanning off, press the Radio Wide Scan option
switch again. The
icon is then no longer indicated and “RWS
OFF” is displayed briefly.
•
If the zone or channel is changed while radio wide scanning,
scanning continues normally.
Scan Resume Delay
When a message is received or transmitted while scanning, there is a
dealer programmable delay before scanning resumes. The delay after
receiving a call prevents another message from being received before you
can make a response, and the delay after transmitting a call ensures that
you hear a response to your call instead of another message occurring on
some other channel.
Standard Mode Scan List
NOTE: The selected channel is always scanned.
With conventional operation up to three scan lists can be
programmed. The list that is scanned is selected by the Scan option
switch as described on page 30. Selecting another conventional channel
does not change the current scan list. The scan lists are user program-
mable if the Scan Edit option switch is programmed.
With SMARTNET/SmartZone operation, each channel can be
programmed so that one of up to three different scan lists is automatically
selected or scanning is disabled. The scan list is not user selectable or
programmable.
Radio Wide Mode Scan List
With radio wide scanning, there is only one preprogrammed scan list
available regardless of the type of channel selected, and it is not user
programmable.
