SMARTNET/SMARTZONE FEATURES
36
Enhanced Private Conversation Calls
General
Private calls allow you to place a call to a specific mobile unit.
Either the Enhanced Private Conversation™ or Private Conversation II™
modes may be programmed depending on the capabilities of the radio
system. The Enhanced Private Conversation mode is described in the
following information, and the Private Conversation II mode is described
starting on page 39.
The Private Call option switch is required to place these calls, and
either that switch or the Call Response option switch is required to
receive them. Proceed as follows.
Placing an Enhanced Private Conversation Call
This call can be initiated by selecting the unit ID from a call list (list
entry) or by directly entering it using the keypad (direct entry). Direct
entry is available with full keypad (15-key) models only. Proceed as
follows:
List Entry Method
1. With a SMARTNET/SmartZone channel selected, momentarily press
the Private Call option switch. The private call mode is indicated by
“
C
” in the upper part of the display. The tag (alias) of the last ID called
is displayed if it matches an ID in your call list. Otherwise, the last ID
called is displayed.
2. Enter the index of the desired ID if you know it or scroll through the list
using the
and
keys until you find the desired ID. Press the
CLR
key to cancel the call.
3. Press the PTT switch or the
ENT
key to initiate the call. The display
then indicates the alias of the destination radio. Proceed to the bulleted
list following the next method for conditions that may occur next.
