E-data DSL-2120 Series User Manual Download Page 11

Page: 11 / 86

firmware and to run diagnostic tests on the DSL-2120/2120W.

Click on Status to see DSL-2120/2120W device information, system logs and

performance statistics.

Click on Help to see available help topics.

2.3 Resetting the DSL-2120/2120W

If you should forget your password, or if you can’t gain access to the DSL-2120/2120W,

you will have to reload the factory-default configuration file or use the RESET button on the

back of the DSL-2120/2120W device to regain access. Uploading the default configuration file

replaces the current configuration file. You will lose all your previously-saved configurations.

The password will also be reset to “1234”.

2.3.1 Using The Reset Button

Step 1.

Make sure the SYS LED is on and not blinking.

Step 2.

Press and hold the RESET button for five seconds, and then release it. When the SYS

LED begins to blink, the default configurations have been restored and the

DSL-2120/2120W will then restart.

Proprietary & Confidential

Page

11 of 86

Revision: V1.0

Apr. 23, 2008

Summary of Contents for DSL-2120 Series























































































Search results

Summary of Contents for DSL-2120 Series

Reviews:

Related manuals for DSL-2120 Series

Brands by name

Popular brands

E-data DSL-2120 Series, User Manual

Search results

Summary of Contents for DSL-2120 Series

Reviews:

Related manuals for DSL-2120 Series

Brands by name

Popular brands