E-data DSL-2120 Series User Manual Download Page 27

Page: 27 / 86

4.3.1 Router Local IP

The following table describes the labels in this screen.

LABEL DESCRIPTION

IP Address

Enter the IP address you wish to use with your LAN here.

IP Subnet Mask

Enter the IP subnet mask you wish to use with your LAN here.

Dynamic Route

Select the Routing Information Protocol (RIP) you wish to use from the

dropdown list and the direction you want from the dropdown list. The

RIP and direction options are described below.

Multicast

Select the multicast protocol you wish to use from the dropdown list.

4.3.1.1 Explaining RIP Setup

Routing Information Protocol (RIP) allows a router to exchange routing information with

other routers. The RIP Direction field controls how RIP packets are allowed to enter and leave

the router. Selecting Both means the DSL-2120/2120W will broadcast its routing table and

incorporate the RIP information that it receives. Selecting “In Only” means the

DSL-2120/2120W will only accept RIP packets received, not send RIP packets. Selecting “Out

Proprietary & Confidential

Page

27 of 86

Revision: V1.0

Apr. 23, 2008

Summary of Contents for DSL-2120 Series























































































Search results

Summary of Contents for DSL-2120 Series

Reviews:

Related manuals for DSL-2120 Series

Brands by name

Popular brands

E-data DSL-2120 Series, User Manual

Search results

Summary of Contents for DSL-2120 Series

Reviews:

Related manuals for DSL-2120 Series

Brands by name

Popular brands