![background image](http://html1.mh-extra.com/html/e-con-systems/e-cam52-35x/e-cam52-35x_hardware-user-manual_3084869009.webp)
e-CAM52_35x
Hardware User Manual
04-Jan-12
Confidential
Page 9 of 10
1. Put the jumper connecting Pin 2 and 3 of JP1 header on OMAP 3530 EVM Rev G. This is
required to connect the camera signals to Micron connector (J31). This is illustrated in
the picture below
Figure 4: JP1 jumper setting
2.
The camera board’s pin one is indicated as below.
Figure 5:
eCAM52_35x
CN2 pin 1 indication
3. Insert the camera board into the Micron header (J31) of the OMAP EVM board as shown
in the image below. Note that the camera module should face outside the board.
Pin 1