background image

1

USB 2.0+FireWire CardBus DV Kit

Quick Installation Guide

04-0274A

Introducing the 

USB 2.0+FireWire CardBus DV Kit

The 

USB 2.0+FireWire CardBus DV Kit 

is a complete DV editing kit

-- a combo design with USB 2.0 and FireWire (1394a) interfaces,

deluxe DV editing software (full DV, AVI, QuickTime, Windows

Media, RealNetworks, and MPEG2 support) and a 1394 6-pin/4-pin

DV cable.

Key Features and Benefits

•   Combo design adds two USB 2.0 (480 Mbps) and two FireWire

(400 Mbps) ports into your system.

•   Hot-swapping feature allows you to connect/disconnect

devices without first turning your system off

USB 2.0 interface:

•   Compliant with USB specification rev. 2.0
•   Supports high-speed (480 Mbps), full-speed (12 Mbps), and

low-speed (1.5 Mbps) data transfer modes for simultaneous

operation of multiple USB 2.0/1.1 devices

•   Works with a various type of USB devices including hubs,

removable drives, digital cameras, scanners, CD-RWs, DVD-

ROMs, PC video cameras, printers, CF/SM/MMC/SD/

Memory Stick memory card readers, and more...

Note:  

USB 1.1 devices are limited to USB 1.1 speeds even

when they are connected to USB 2.0 host adapter or USB 2.0

hubs.

FireWire (1394a) interface:

•   IEEE 1394-1995, P1394a-2000 and OHCI Interface Specification

1.1 compliant

•   Supports serial bus data transfer rates of 100, 200 and 400

Mbps

•   Works with various types of 1394 devices including DV

camcorders/cameras, hard disk drives, CD-RWs, DVD-ROMs,

removable drives, scanners, and other audio/video devices

Summary of Contents for US2273









Reviews: