29
3.4 Reverse
3.5 Cruise
Control
3.6 Switch off
the light
3.7 Engage the
Alarm
Reverse (push
⇓
long and keep it) (only on the 20m/h model available)
Never activate the reverse button while riding. This feature is only to be used for convenience
when backing up the E-Bikeboard while the operator is standing firmly on the ground. Push the
⇓
button to go in reverse and release to go forward.
Cruise Control
You can setup the automatic cruise control (see 3.7 Setup) to engange after 3s, 4s or 5s. If you
keep then the speed for the choosen interval, the E-Bikeboard will continue at the selected
speed without activating the throttle. The cruise control is deactivated by pressing the button
again, activating a brake lever, or by using the throttle.
The light is always turned on because of homologation and security reasons. If you push the
mode button and
⇑
together for 2s, the E-Bikeboard will switch to maintenance mode and turn
off the light. If you push the mode button and
⇑
again together for 2s, you can switch on the
light again.
In the Setup Menu you can active (Set6=1) or deactivate (Set6=2) this function. If the alarm
function is activated, you can engage the alarm like this:
A)
After turn off the Bikeboard with the key,
B)
push the horn button. The light will blink 3 times to singal the alarm is engaged.
When the bikeboard is moved, or manipulated (horn button, throttle, the alarm will go off).
To turn off the alarm, turn on the E-Bikeboard again.
Page 30 of 44
3.8 Setup Control
(Software
Version 18-22*)
Through the display, you can setup several parameter
.
1.
Change to setup mode: you push
⇓
and
⇑
together.
2.
Short push on Mode alternate between the different Set’s.
3.
Long push on Mode stores the settings and exit the setup mode.
Explain the different Set’s (see set nr. on right top corner)
•
Set 1: Wheel Size Setup (for calibrate the speed)
Default = 16
•
Set 2: Set Speed Limit
Default = 45 (so the limit is not active and the max speed is according the motor)
•
Set 3: Display backlight 1-2-3
Default = 1
•
Set 4: Change km / miles
Default km
•
Set 5: Choose Battery-Type (for calculate the range and behavior with empty battery)
o
1 = 1 Battery with “Safe-Home Mode*”
o
2 = 2 Batteries, with *Safe-Home Mode*”
o
3 = 1 Battery, without “Safe-Home Mode*”
o
4 = 2 Batteries, without “Safe-Home Mode*”
Default 4 (or 3 if only one battery)
•
Set 6: Alarm function (1=activ, 2 = not active)
Default: 2 (use only 1 or 2!)
•
Set 7: Choose start mode (2 = Soft Start .... 10 fast Start)
Default 5 (make sure you don’t use 1)
•
Set 8: Setup Cruise Control, Safe Brake fu Maintenance Mode
o
1 = no cruise control, safe brake function activated
o
2 = no cruise control, safe brake function disabled
o
3 = auto cruise control after 3 seconds , safe brake function disabled
o
4 = auto cruise control after 4 seconds , safe brake function disabled
o
5 = auto cruise control after 5 seconds , safe brake function disabled
⇑
⇓
Mode
Display in Setup Mode,
Examplel Set5=4
Safe-Home Mode = Limits power
and speed towards end of battery
capacty