25
LED2 green
•
If not plugged in
Charger
ready to charge
•
If connected to battery:
battery is fully charged
LED2 rot
Charging process ongoing
LED1 red
Charger is
connected to
the power
and ready
CAUTION
Do not combine batteries with different charge levels on the same E-Bikeboard; i.e. one
fully charged battery with one partially discharged battery.
SAFETY ALWAYS USE ONLY AN ORIGINAL E-BIKEBOARD CHARGER!
Follow all safety instructions regarding the handling of the batteries, including the
following:
•
Only use the approved, original E-Bikeboard battery charger to charge your
batteries.
•
Use only in temperatures ranging from -15°C (5F) to 60°C (140F).
•
Do not let children play with batteries.
•
Do not put batteries in a microwave.
•
Do not open the batteries.
•
Do not expose batteries to an open flame.
•
Do not use batteries in water.
Do not throw batteries into the garbage; for proper disposal of batteries see section
“Disposal”.
LED 2
Page 26 of 44
3.2 Handlebar Control
Features
Left Side of Handlebar
Horn :
Push down to activate the horn.
Display Control
There are 3 buttons:
1.
Arrow up
⇑
2.
Mode
3.
Arrow down
⇓
More details are in the next chapter “display control”
Brake Levers on Handlebar
Both handlebars are equipped with brake levers (left operates rear brakes;
right operates front brakes). Primarily use left brake levers! Only use right
brake lever in addition to the left brakes levers, if further brake force is
required.
Right Side of Handlbar
Key Switch
For turn on rote the key clockwise. After this you have to push the mode
button for 2s.
Throttle
Use throttle only if you are ready to ride and on the E-Bikeboard. Turn the
throttle very slowly and carefully, since an electric motor has the maximal
torque when starting.
