17
2.2. Unfold
Handlebar
CAUTION Beware of
Pinchpoint
Folding Stem Variant 1 (not heigth adjustable)
•
Fold up stem with attached handle bar (1) so that the center guide (A) and the stem
align parallel to the cylinder(B) below.
•
Push in safety lock button (2) fully and push down the stem at the same time until the
safety lock button pops out again (3).
•
Pull the stem up again to check if the stem sits firmly on the cylinder; the stem should not
move up or down and the safety lock button should sit correctly in its proper position (3).
Adjust counter nut (4) of the quick release until you feel a strong pressure when closing
the quick release (5) and you are able to firmly push it down onto its arrester (6).
1
3
2
A
B
Page 18 of 44
Folding Stem Variant 2 (height adjustable, Picutres on next page)
1.
Unfold the handelbar (1), and keep the hook up, so it can be placed over the
connection piece.
2.
Place the hook in the connection piece. Make sure, there is enough pressure when
closing, otherrwise tighten the adjusting screw (use an allan key size 5)
3.
Close the lever, make sure the small lever lock the big lever.
4
5
6