C H A P T E R 2
Fold and Move the Dyno
Model SD12 Scooter Dynamometer Installation Guide
2-12
FOLD AND MOVE THE DYNO
Use the following instructions to fold and move the scooter dyno.
F
OLDING
THE
D
YNO
1
Lift the front support up until it clicks and locks into place.
2
Lift the spring plunger and slide the wheel clamp forward on the front support.
Release the spring plunger to lock the wheel clamp in position.
3
Raise the ramp until it comes in contact with the front support.
4
Lift the spring plunger and slide the wheel clamp until it locks the ramp in place.
Release the spring plunger.
Figure 2-8: Folding the Dyno
SD021
slide wheel clamp to
lock ramp in place
slide wheel
clamp forward
lock front support
in place
raise ramp
