1-7
S P E C I F I C A T I O N S A N D O P E R A T I N G R E Q U I R E M E N T S
Dynamometer Specifications and Requirements
Version 2
Model SD12 Scooter Dynamometer Installation Guide
F
ORKLIFT
R
EQUIREMENTS
You will need to provide equipment capable of lifting a minimum of 454 kg.
(1000 lb.) to lift and move the crated dyno.
You will need to provide a 5/8-inch x 3-foot steel bar to lift the drum off the crate.
G
ROUNDING
R
EQUIREMENTS
You will need to ground the vehicle to the dynamometer before every run using the vehicle
grounding kit P/N 76100015. Never operate the dynamometer without first grounding the
vehicle to the dynamometer. Refer to “Grounding the Vehicle” on page 3-7.
Always ground the vehicle to the dynamometer. Never operate the
dynamometer without properly grounding the vehicle to the dyno.
P
HONE
AND
I
NTERNET
A
CCESS
Dynojet recommends you have a phone close to the dyno to call for assistance in an
emergency. You may also wish to contact Dynojet to troubleshoot your dyno.
Internet access on your computer is desirable for contacting Dynojet and downloading
new information and updates.
T
IE
-D
OWN
S
TRAPS
Dynojet recommends using motorcycle tie-down straps for securing the bike on the
dyno. You will need to provide the tie-down straps.
