C H A P T E R 2
Unpacking the Dyno
Model SD12 Scooter Dynamometer Installation Guide
2-4
R
EMOVING
THE
D
RUM
FROM
THE
C
RATE
You will need to provide a 5/8-inch x 3-foot steel bar to lift the drum off the crate and
into position in your dyno room. Lifting the drum will require two people.
#
RECORD
Be sure you record the dynamometer number on the inside cover of this
manual.
1
Remove the lag bolts and washers securing the drum to the crate base using a
9/16-inch socket, open or box end wrench.
2
Insert the 5/8-inch x 3-foot steel bar into the shaft hole.
3
Using two people, carefully lift the drum off the crate and move into position in
your dyno room.
Figure 2-1: Insert the Steel Bar and Lift the Drum off the Crate
The following parts are included in the Grounding Kit P/N 76100015:
grounding bracket
P/N 21600084
cable, vehicle ground
P/N 76950788
screw, 1/4-20 x 1/2"
P/N 36560834
part
description
part
description
SD018
steel bar
shaft hole
