3-7
B A S I C D Y N O O P E R A T I O N
Grounding the Vehicle
Version 2
Model SD12 Scooter Dynamometer Installation Guide
GROUNDING THE VEHICLE
You will need to ground your vehicle to the dyno before every run. Use the following
steps to install the grounding bracket and ground the vehicle to the dyno.
Always ground the vehicle to the dynamometer. Never operate the
dynamometer without first grounding the vehicle to the dyno.
You will need the following parts:
• 21600084
Grounding Bracket
• 36560834
Screw, 1/4-20 x 1/2"
• 76950788
Vehicle Grounding Cable
1
Choose any location on your dyno with a black 1/4-20 x 5/8-inch torx screw that
threads directly into the sheet metal and remove this screw.
2
Secure the grounding bracket to this location using one 1/4-20 x 1/2-inch screw.
3
Attach the vehicle ground cable to an exhaust bolt or engine bolt on the vehicle.
4
Attach the vehicle ground cable to the grounding bracket.
