1-1
Torque Cell Installation Guide for Model 250i/250iP DynoWare RT Dynammometers
C
H A P T E R
1
T
ORQUE
C
ELL
I
NSTALLATION
The torque cell along with Dynojet Power Core software provides the technician with
the ability to control vehicle RPM or speed at any throttle opening. Through our
exclusive closed-loop software design, the vehicle is automatically held at your pre-
determined setting. Use the torque cell and Power Core software to measure real-time
torque, and perform sweep, step and custom load simulation tests.
This document provides instructions for installing the torque cell on a Dynojet
Model 250i/250iP DynoWare RT Motorcycle Dynamometer (dyno) and calibrating
the torque cell using Power Core software. To ensure safety and accuracy in the
procedures, perform the procedures as they are described.
Document Part Number: 98200070
Version 2
Last Updated: 07-01-2015
This chapter is divided into the following categories:
• Introduction, page 1-2
• Main Dyno Power, page 1-3
• Accessing the Dyno, page 1-5
• Load Cell Installation, page 1-9
• Routing the Load Cell Cable, page 1-12
• Replacing the Covers, page 1-14
