Dyness Powebox F Series, User Manual

Page: 4 / 26

2
Safety Precautions
Warning
⚫
Please do not put the battery into water or fire, in case of explosion or any other situation
that might endanger your life.
⚫
Please connect wires properly while installation, do not reverse connect.
To avoid short circuit, please do not connect positive and negative poles with conductor
(Wires for instance).
⚫
Please do not stab, hit, trample or strike the battery in any other way.
⚫
Please shut off the power completely when removing the device or reconnecting wires
during the daily use or it could cause the danger of electric shock.
⚫
Please use dry powder extinguisher to put out the flame when encountering a fire hazard,
liquid extinguisher could result in the risk of secondary disaster.
⚫
For your safety, please do not arbitrarily dismantle any component in any circumstances
unless a specialist or an authorized one from our company, device breakdown due to
improper operation will not be covered under warranty.
Caution
⚫
We have strict inspection to ensure the quality when products are shipped out, however,
please contact us if case bulging or other abnormal phenomenon.
⚫
For your safety, device shall be ground connected properly before normal use.
⚫
To assure the proper use please make sure parameters among the relevant device are
compatible.
⚫
Please do not mixed use batteries from different manufacturers, different types and models,
as well as old and new together.
⚫
Ambient and storage method could impact the life span and product reliability, please
consider the operation environment abundantly to make sure device works in proper
condition.
⚫
For long-term storage, the battery should be recharged once every 6 months, and the
amount of electric charge shall exceed 80% of the rated capacity.
⚫
Please charge the battery in 18 hours after it discharges fully and starts over-discharging
protection.
Formula of theoretical standby time: T=C/I (T is standby time, C is battery capacity, I is total
current of all loads).