manualshive.com logo in svg

Dynatronics Dynatron 525, Operator'S Manual

Share
Download
Dynatronics Dynatron 525 Operator'S Manual Download Page 13

dynaTron® 25 serIes PhysICal feaTures

DYNATRON® 25 SERIES™  |  OPERATOR’S MANUAL

7

Dynatron

®

 25 Series  

Physical Features

Before operating the Dynatron 25 Series devices, acquaint yourself with the control panel by reviewing the illustrations and 
descriptions on the following pages. The numbered features in the diagrams correspond to the numbered descriptions. 
Before administering treatment to a patient, read the sections later in this manual that provide specific instructions for 
performing treatments, discussions of each modality, definitions of the available options, along with contraindications, 
warnings, and precautions for all modalities. 

Note: The User Interface on the 25 Series devices is engineered with “CapSense Touch Technology” requiring that the user 
make direct contact with the keys on the faceplate with bare fingers or the use of a glove with a conductive fingertip.  

Summary of Contents for Dynatron 525














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands