Dynatron 150plus, Service Manual

Page: 10 / 65

Dynatron ® 150 plus
Installation & Features
4
Dynatron 150plus Physical Features
Before operating the Dynatron 150plus, acquaint yourself with the control panel by
reviewing the illustration. Each of the features is numbered in the diagram, and a
description for each feature follows.
1
Dynatronics
FREQ
4
5
9
15
3
1 MHz
3 MHz
DUTY
CYCLE
POWER TIME
PAUSE
STOP
START
10%
50%
20%
CONT
12 10 11
7
6
8 13
14
16
2
e
2 MHz
Dynatron 150plus Control Panel
1. POWER OFF/ON SWITCH: Located on the back of the unit. This switch is labeled
“1” and “0”. Set the switch to “1” for ON; set the switch to “0” for OFF.
2. ELECTRICAL STIM INPUT
JACK: This jack is used for
combining Ultrasound with
electrical stimulation. The
output end of a lead connected
to a Dynatron electrotherapy
device may be plugged into this
jack. The current from the stim
device is delivered through the
soundhead.
3. BATTERY INPUT: This input
located on the back of the
device provides connection to
Dynatron 150 plus Input Jack