Dynatron 150plus, Service Manual

Page: 36 / 65

Dynatron ® 150 plus
Technical Specifications
30
Dynatron 150plus Care and Cleaning Instructions
Clean the outer surface of the Dynatron 150plus with a slightly damp or lightly
moistened cloth. Mild household cleaners work well. Do not spray the solution
directly on the unit. First moisten the cloth and then wipe the unit off. Solvents,
caustic solutions and harsh or abrasive cleaners must never be used.
Soundheads should be cleaned with warm water. Always keep the soundhead free
from gel buildup.
Avoid stretching cords to full length. Do not bend cords sharply. Do not wrap cord
tightly to store. Undue stress on soundhead cords can damage connections.
Do not drop the unit or the soundheads as severe damage will occur.
Keep all food and soft drinks away from the machine and its accessories; spills can
cause costly damage to the machine, and repairs for this type of damage are not
covered by the warranty.
Suggested Maintenance Schedule
SERVICE TO BE PERFORMED BY A TECHNICIAN:
Annually
• Annual Ultrasound calibration should be performed by a qualified technician.
• Inspect soundhead connectors on unit and on soundhead.
MAINTENANCE PERFORMED BY USER:
1. Inspect accessories daily for wear and damage. Examine cables and connectors
on the cables for any visible sign of wear or damage. Replace accessories as
needed.
2. Examine Ultrasound heads periodically for cracks which may allow ingress of
conductive fluid.
3. If a machine or soundhead is dropped, or if it sustains damage due to lightning,
severe power surge, submersion in water, or other incident that could cause
damage to electronic components, the device must be examined by a Dynatronics
technician before being returned to clinical use.
4. For older devices contact Dynatronics or your Dynatronics dealer for information
and pricing for current upgrades to your device. Even if the machine is
functioning properly, you can send it to Dynatronics for preventative maintenance
service for a nominal charge; call for pricing.