Dynapac DRP20, Operating Instructions Manual

Page: 56 / 112

3.
CAUTION!
Danger of injury caused by the crushing
of body parts!
– When reversing, steer the machine from
the side using the steering handle.
Pull the travel lever back.
ð
The machines vibrates backwards with a speed which
corresponds with the travel lever position.
4. Shift the travel lever back to position “0”.
ð
The machine stops and vibrates on the spot.
5. For short work interruptions you should always return the
throttle lever to “MIN” position (idle speed).
ð
Vibration is switched off.
6. For short work interruptions you should always park the
machine in secured condition Ä Chapter 6.4 „Parking the
machine in secured condition“ on page 57 .
1. Keep shifting the throttle lever between “MIN” and “MAX”
positions.
At the same time use the steering rod to pull the machine
right and left, until it comes free.
Fig. 34
Fig. 35
Fig. 36
Help if the machine gets stuck
Fig. 37
Operation – Operation
DRP20 56