Dynapac DRP20, Operating Instructions Manual, Page: 97 / 112

Special tool: n 13/16 inch spark plug spanner
1. Unscrew the spark plug using a 13/16 inch spark plug
spanner.
2. Fill in several drops of fresh engine oil through the ignition
plug opening.
3. Crank the engine several times with the recoil starter to dis-
tribute the oil in the cylinder.
4. Screw the spark plug back in.
5. Slowly pull the starter rope until resistance can be felt and
the alignment mark (2) on the starter disc is in line with the
upper bore (1).
ð
Valves will be closed so that no moisture can enter into
the cylinder.
6. Slowly guide the starter rope back.
1. After shutting down store the machine under cover in a dry
and well ventilated room.
2. Cover the engine to protect it against dust and moisture.
3. A machine with conserved engine must be clearly marked by
attaching an information sign.
8.10.6.2 Measures before restarting
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
1. Check the oil levels.
2. If the fuel was drained off before shutting down, you must
now fill in fuel.
3. Check hoses and lines for cracks and leaks.
Protecting the cylinder
Fig. 110
Fig. 111
Parking the machine
Maintenance – As required
DRP20 97