Dynapac DRP20, Operating Instructions Manual

Page: 90 / 112

7.
NOTICE!
Components may get damaged!
– Use only oil of the permitted specifica-
tion.
Fill in hydraulic oil up to the mark on the steering rod head.
Mark: approx. 40 mm (1.6 in) below the filler opening
8. Slacken the bleeding screw.
9. Wait until all air has escaped and then tighten the bleeding
screw.
10. Fill in hydraulic oil up to the mark on the steering rod head.
11. Screw in the filler screw.
12. Dispose of oil in line with environmental regulations.
40 mm
HV 32
B-692-0047
Fig. 97
B-692-0072
Fig. 98
40 mm
HV 32
B-692-0047
Fig. 99
B-692-0045
Fig. 100
Maintenance – Every 2 years / every 500 operating hours
DRP20 90