Dynapac DFP12D, Operating Instruction

Page: 60 / 98

7.1 Loading the machine
Loads may only be attached and hoisted by an expert/qualified
person.
Do not use lifting points that are damaged or impaired in any other
way.
Only use lifting tackle with sufficient load bearing capacity for the
weight to be loaded. Minimum load bearing capacity of lifting
tackle: see operating weight
Ä
Chapter 2 „Technical
data“ on page 11 .
Always use appropriate lifting tackle at the lifting points.
Use lifting tackle only in the specified loading direction.
Lifting tackle must not be damaged by machine parts.
When lifting the machine, make sure the load does not move in an
uncontrolled way. If necessary, hold the load steady with guide
ropes.
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.5 „Parking the machine
in secured condition“ on page 58 .
2. Allow the engine to cool down.
3. Fold the guide handle forwards.
4. Attach the lifting tackle to the dedicated lifting eye.
5.
DANGER!
Danger to life caused by suspended
loads!
– Do not step or stand under suspended
loads.
Lift the machine carefully and set down again at the intended
location.
6. If necessary, pull the machine by the handles (1) on an even
surface.
Fig. 42
Fig. 43
Loading/transporting the machine – Loading the machine
DFP12D 60